Good morning. I notice there was some previous posts about this subject with Logix 5000. Would anyone happen to have any info or examples using 500 with a RS232 port off the processor? We are setting up a system with a R2000iA robot and a rotating unit to stamp scuba tanks. I have to provide 8 characters for a lot number that changes characters every 202 pieces. Any help would be greatly appreciated, thanks, Chris.
SLC 500 Programming with a Telesis TMC420 Pinstamper
- Thread starter jacchr
- Start date
Similar Topics
Good morning. I notice there was some previous posts about this subject with Logix 5000. Would anyone happen to have any info or examples using...
Hi all,
I am new to PLC programming and decided to build a test rig (photo enclosed) to try and teach myself how to do it.
I have written a...
I have a AB SLC 500. Can I use 6200 software to communicate with it? I have the 1747 programmer but I was kinda wanting to use a computer.
Thanks
Please help to find the documents for programming RSLogix 500 for AB/SLC 500 on the net. I am new in this product so any information will be big...
Howdy everyone,
My company has a few machines running on SLC500 based PLC, and everytime it makes a part we count up on the counter which gets...
