SMOKE
Member
I have read some threads on fault handeling, and reseting. Perhaps I dont understand yet.
I have some an alalog device that if the machine sits the reading will go past 32767. I dont care. As soon as the opperator moves this hydraulic device the reading is in the zone and all is well.
A previous programmer has put unlatch of s:5/0 at the start of the routine. I belive that the overflow is getting set and reset every scan and if gives me a majior fault.
Is there a way to ignore the overflow. What do I need to do.
I have some an alalog device that if the machine sits the reading will go past 32767. I dont care. As soon as the opperator moves this hydraulic device the reading is in the zone and all is well.
A previous programmer has put unlatch of s:5/0 at the start of the routine. I belive that the overflow is getting set and reset every scan and if gives me a majior fault.
Is there a way to ignore the overflow. What do I need to do.