I just installed a system using a 9300-ENA network device. The uplink port is connected to the plant network and the local to a L30ER compact logix with 10 point I/O modules over ethernet. When I connect to the 9300-ENA directly(uplink port) everything works perfectly. I have tested the network connections to the 9300-ENA and they work fine. I am able to view/upload from the plc but it is very slow.
Has anyone had much experience with the 9300-ENA module? They appear to be fairly new and there is not much information on them. Like I said it works, just very slowly.
Here is a link to Rockwells page on the 9300-ENA
Has anyone had much experience with the 9300-ENA module? They appear to be fairly new and there is not much information on them. Like I said it works, just very slowly.
Here is a link to Rockwells page on the 9300-ENA