hi guys,
i am new plc programming learner. i stucked in one of the excercise problem of speed control of servo motor using increment/decrement.
the question is:
1. control servo motor speed using up/down speed button using increment/decrement function.
2. servo is connected to analogue card which is reading data from plc register x.
3. 0000 value in register result in stop and 9999 result in maximum speed of motor.
4. if any button pressed for very long motor should reach maximum/minimum speed automaticly.
please any one help me with this solution.
thanks in advance.
i am new plc programming learner. i stucked in one of the excercise problem of speed control of servo motor using increment/decrement.
the question is:
1. control servo motor speed using up/down speed button using increment/decrement function.
2. servo is connected to analogue card which is reading data from plc register x.
3. 0000 value in register result in stop and 9999 result in maximum speed of motor.
4. if any button pressed for very long motor should reach maximum/minimum speed automaticly.
please any one help me with this solution.
thanks in advance.