GO316plc
Member
I'm trying to configure a Spectrum 1762sc-OF8 module connected to MicroLogix 1400 for 4-20mA, needed help. Following the user manual's sample configuration ladder program, all I got is a rapid blinking light.
Sprctrum 8 point output module configuration
- Thread starter GO316plc
- Start date
Similar Topics
Good morning, I have a question regarding some point I/O modules. We use 1734-IE2V modules to measure the tension of a fiber, but we have quite a...
Hi,
I have some problem with View Point which I'm using to manual control of conveyors. On begin when in network was only PLC and HMI View Point...
I have a bunch of tags in Historian/VantagePoint that off by one decimal point. I looked into the HMI displaying the same number, and the HMI is...
Good morning,
I have a Emerson/GE PLC with Cimplicity SCADA. I need to export data of a specific point/object to a CSV file and load the CSV file...
Dear
We are working in AB Studio 5000 and the drive is a PowerFlex 755T. For this project I need to control a conveyor to a certain set point...