I am trying to implement a sfift-by-wire on a vehicle and for that I am using a standard servo motor (https://www.sincecam.com/products/s...num-case-suitable-1-8-1-10-1-12-rc-crawler180).
I have a ifm CR711s PLC that I am using as a controller.
I send a PWM duty cycle signal to the servo to control the position of the servo.
But my servo is jittering and I am unable to keep the position.
What could be the reason and how can I solve this issue. Any inputs would be helpful.
I have a ifm CR711s PLC that I am using as a controller.
I send a PWM duty cycle signal to the servo to control the position of the servo.
But my servo is jittering and I am unable to keep the position.
What could be the reason and how can I solve this issue. Any inputs would be helpful.