xiaoqiang83
Member
Hello everybody and master,I met a problem about ML1200.It is described as below:
1,When i got this PLC,The FAULT light is lighting, My computer can successfully connect it via DF1;
2,I decided to update the firmware and swap the PLC,Firstly i want to update it to Version 14,But unforunately not successful,It appear that the error message as picture shown--"When update v14,The error message".
3,I searched and found a master mentioned that maybe we need to update it via a lower version control flash, Then i use control flash v11 can successfully update the firmware to V14,But when i changed it running mode, The fault light is lighting and the error message is that "Base hardware is fault or the base hardware is incompatible with OS".S6=Bh
If someone can help to solve this problem or give some suggestion,I am so appreciate that. Thanks
1,When i got this PLC,The FAULT light is lighting, My computer can successfully connect it via DF1;
2,I decided to update the firmware and swap the PLC,Firstly i want to update it to Version 14,But unforunately not successful,It appear that the error message as picture shown--"When update v14,The error message".
3,I searched and found a master mentioned that maybe we need to update it via a lower version control flash, Then i use control flash v11 can successfully update the firmware to V14,But when i changed it running mode, The fault light is lighting and the error message is that "Base hardware is fault or the base hardware is incompatible with OS".S6=Bh
If someone can help to solve this problem or give some suggestion,I am so appreciate that. Thanks