TIA PORTAL can't be linked to S7-314C- 2DP, via MPI

mourad69

Member
M
Join Date
Nov 2010
Location
casablanca
Posts
7
Hi everyone,

We have a portal TIA V13, the USB cable adapter 6ES7 972-0CB20-0XA0, but after plagin the usb cable, there is only the PPI protocol through Com4 in On-Line access, so the MPI protocol doesn't appear, the first problem is that the driver is only supported by windows XP, i know that the portal TIA has it's driver integrated, I have already activated the port MPI in the configuration device level.

Many thanks for any answer!
 

Similar Topics

M
TIA PORTAL can't be linked to S7-314C- 2DP, via MPI
Hi everyone, We have a portal TIA V13, the USB cable adapter 6ES7 972-0CB20-0XA0, but after plagin the usb cable, there is only the PPI protocol...
Replies
0
Views
2,035
mourad69
M
R
TIA PORTAL 14.0
Need TIA PORTAL 14.0 and i want to take a upload from plc. I can't download from anywhere. please give me download link. thanks
Replies
3
Views
52
mk42
M
W
Convert Codesys code to Siemens tia portal
Hi! What is the way to convert the code from the Codesys code to the Tia Portal? Regards, WK
Replies
4
Views
73
Wak
W
K
Tia Portal Security Screen
Hey Guys, I am using a siemens IPC with a siemens RFID setup (Part numbers below). I am looking to create a screen where I can add/remove users...
Replies
13
Views
211
kevilay
K
M
how insert a hexadecimal to 4 bytes in tia portal ?
i am using profibus, i want to insert a hexadecimal word or byte to 4 byte like in the phot but i don't know how
Replies
6
Views
164
drbitboy
drbitboy
Back
Top Bottom