Ingis
Member
Hi,
I'm rather new to siemens. I have a project were the plc needs to be upgraded, new code, ... The existing hardware needs to be reused.
There are some profibus components and one is giving me a bit of a headache.
I can only find some basic information in an german manual (not my mother language)
- profibusadresse : 26
- all parameters 16 bit words
- data protocol DIN 3946R
- parity even
- baurate 9600
is it possible to add a generic component were you can configure some parameters that will allow me to talk to that component?
best regards,
Wesley
I'm rather new to siemens. I have a project were the plc needs to be upgraded, new code, ... The existing hardware needs to be reused.
There are some profibus components and one is giving me a bit of a headache.
I can only find some basic information in an german manual (not my mother language)
- profibusadresse : 26
- all parameters 16 bit words
- data protocol DIN 3946R
- parity even
- baurate 9600
is it possible to add a generic component were you can configure some parameters that will allow me to talk to that component?
best regards,
Wesley