Time-stamp PLC+Ethernet based I/O

Tommen

Member
T
Join Date
Sep 2008
Location
Espoo
Posts
1
Hi,

I am involved in a project where we need timestamping below 10ms on networked I/O. At the moment I/O is located in 30 locations, with about 80 I/O per location.

Has anyone knowledge if this is possible with ex. Profinet or Ethercat, and in this case which PLC vendor has this possibility ?

Thanks for answers
 

Similar Topics

A
Timestamp outputs
Does anybody know how 'timestamp output' functionality internally works in a controller? I do not mean the instructions you use as a programmer...
Replies
0
Views
68
aand74
A
celichi
PanelView Plus 7 Performance - CSV Export Time Stamp
Hello Everyone, I hope we are all good! I have a strange one, and wondering if anyone has seen this before. When I look at the CSV Export Logs...
Replies
3
Views
1,610
thumperbs
T
D
AB PVPlus alarm date/time stamp
So I've got an issue I have yet to figure out. I have a PVPlus standard HMI runtime v12. I've gone into the system and set the date and time and...
Replies
7
Views
4,841
Dariusincj
D
B
Wonderware Intouch Time Stamp
Hi.. I was looking for a bit of help from someone that works with intouch scada... At the moment I have a Box that contains an animated Tick when...
Replies
4
Views
2,745
barney123
B
T
PLC Date and time stamp in excel
Dear Members; I make a date and time stamp by using GSV and SSV instructions. The DINT array with 7 elements stores those values. Now I want to...
Replies
5
Views
1,515
drbitboy
drbitboy
Back
Top Bottom