adnan_hayat88
Member
I am currently working on an project which involves upgrading an 90/70 system to Rx7i system. The 90/70 controller has been replaced by Rx7i CPU. Now i am integrating new IO`s using VersaMax modules connected over Genius bus.
I am addressing the new IO`s after the existing addresses. But when I configure an NIU card it defines an addressing range of 0-64 for Analog inputs and outputs. I want to edit the starting range for example make it 65-128. Please help me out
I am addressing the new IO`s after the existing addresses. But when I configure an NIU card it defines an addressing range of 0-64 for Analog inputs and outputs. I want to edit the starting range for example make it 65-128. Please help me out