Hi;
Its recommended that whenever a welding work is require at any machine where inverter drives, PLCs etc are present, switch off the power of machine before welding. It may be possible that the sensitive electrical things can damage during welding work.
I want to know the technical reasons behind it. Has anyone faced such kind of electronics failure during welding work?
As now a days electronics welding machines are being used, is the risk of damage (if presented with conventional welding machines) of electronic things still there if welding work is done at machine during power is ON?
I do agree that machine power should be off during any welding work but sometime due to some reasons, machine's power can not be off.
Its recommended that whenever a welding work is require at any machine where inverter drives, PLCs etc are present, switch off the power of machine before welding. It may be possible that the sensitive electrical things can damage during welding work.
I want to know the technical reasons behind it. Has anyone faced such kind of electronics failure during welding work?
As now a days electronics welding machines are being used, is the risk of damage (if presented with conventional welding machines) of electronic things still there if welding work is done at machine during power is ON?
I do agree that machine power should be off during any welding work but sometime due to some reasons, machine's power can not be off.