Westfalia PLC ??

bluenoser337

Member
Join Date
Apr 2003
Location
Nova Scotia
Posts
391
Two Westfalia-Separator PLCs just landed on my desk for evaluation...not something I've ever seen before. They are used on a ship to operate oil separators...hence the brand. They are identified as Type PLC 100/3(C) Nr.31907324. The unit is a PLC and OP all in one. There is a slot in the back for a memory cassette, but I don't have those. When one unit is powered up, the "F-Key" LEDs all come on steady and the display does not illuminate. When the other unit is powered up all the LEDs flash rapidly, and the internal relay operates at the same rate. I need to determine if these are functional. Anybody have any info on these? The guts of the unit doesn't reveal any PLC brand names. It is a German made unit filled with RIFA relays and chips from Motorola, Toshiba, Hyundai, and Philips.
 
Westfalia Separator Canada, Inc.
835 Harrington Court
Burlington ON L7N 3P3, Canada
Tel.: +1/905/319-3900
Fax: +1/905/319-3903
eMail: [email protected]
Internet: www.gea-westfalia.ca
 

Similar Topics

We got a couple of Purifiers onboard and the automatic system is out of date. Anyone have a plc program for this?
Replies
2
Views
2,430
Hello, I want to connect the Factorytalkview ME with rslogix500 to see the live response of HMI buttons in Rslogix500 ladder code . I am using PLC...
Replies
4
Views
27
I have a cell with a compact guardlogix as the plc and I have three hmi's and two vfd's on this cell. I been experiencing momentary comms faults...
Replies
10
Views
76
Hi, hope you doing well I am looking for SIEMENS PLCSIM equivalent in GE FANUC PLC, RX3i PLC thank you
Replies
2
Views
28
Hai, I'm working on Allen Bradely PLC RS Logix 5000 V20 i tried to communicate modbus communication with AB plc and RS 232 to Ethernet converter...
Replies
1
Views
55
Back
Top Bottom