leem2209
Lifetime Supporting Member
Recently we've had a machine replaced for a new one but different manufacturer.
I've been involved in interfacing with PCS7 DCS and so far I've worked most of it out (My first job on PCS7 and was left to work it out mostly alone, but with some Siemens support)
So, the hard wiring is fine and the operation from the WinCC faceplate has been modified, tags created for various readings, etc.
Next is the alarms. Currently if there is a crtical error on the machine, then an alarm is signalled via the hardwired signal, and that goes to the DCS input which was the same for the old machine. Thats fine. The operator knows there's something wrong and can divert to another machine.
To see what the actual alarm is, the operator has to go to the machine. This is the same for warnings.
I've looked in the "Alarm Logging" for anything related to the old machine. I have found 17 alarms of different "class" and "type" so wanted to re-map the tags to be activated from signals frm the new machine (comms already established and relevent DB's have been set up in the DCS to read the machine alarms)
Now this is where I'm a little bit stuck. The tags are #RawEvent and from what I've read this saves using tag allowance.
So all the tags are the same (S7$Program(AS1)#RawEvent) and the Format DLL is NRMS7PMC.NLL
I don't know where to go from here. I'm asuming a program compiles some data to create the *.NLL file which contains the alarm tag reference?
If I am right, where do I go from here to change that reference data?
Mucho Grazias for any help!
I've been involved in interfacing with PCS7 DCS and so far I've worked most of it out (My first job on PCS7 and was left to work it out mostly alone, but with some Siemens support)
So, the hard wiring is fine and the operation from the WinCC faceplate has been modified, tags created for various readings, etc.
Next is the alarms. Currently if there is a crtical error on the machine, then an alarm is signalled via the hardwired signal, and that goes to the DCS input which was the same for the old machine. Thats fine. The operator knows there's something wrong and can divert to another machine.
To see what the actual alarm is, the operator has to go to the machine. This is the same for warnings.
I've looked in the "Alarm Logging" for anything related to the old machine. I have found 17 alarms of different "class" and "type" so wanted to re-map the tags to be activated from signals frm the new machine (comms already established and relevent DB's have been set up in the DCS to read the machine alarms)
Now this is where I'm a little bit stuck. The tags are #RawEvent and from what I've read this saves using tag allowance.
So all the tags are the same (S7$Program(AS1)#RawEvent) and the Format DLL is NRMS7PMC.NLL
I don't know where to go from here. I'm asuming a program compiles some data to create the *.NLL file which contains the alarm tag reference?
If I am right, where do I go from here to change that reference data?
Mucho Grazias for any help!