SiemensAutoAnsari
Member
Dear Experts,
Need your suggestions. I am to take up an upgradation project (s7_314 IFM with PC to s7-1500 with TP1900) for our Concrete Block Manufacturing machine. Picture is attached for a transport system, where Wet produced blocks are carried to Curing chambers and after 2 days, removed and transported back to despatch conveyor. There are 21 chambers with 12 rows each (except first 3, which have 9 rows)..
I have s7-314 IFM with one positioning module and several DI,DO modules.
I want to replace Winxp PC with Siemens HMI TP1900. We don't have source file for PC program.
I have tia v15 with wincc advanced with me. I never did any animation project before.
I want to know how shall I proceed for animation programming as currently whole animation programming code is in pc, plc only works as Slave.
What is thr best expert approach for this Hmi animation coding?
Is hmi alone capable of doing so i.e Keeping track which chamber is full and which has empty spaces? Can HMI decide the Filling and Removing Chambers on it's own and direct PLC accordingly?
Guys! Don't hesitate to reply. I just need an Expert approach to accomplish this animation and storage task (without/few changes in PLC program).
Regards,
Mr. G M Ansari
Need your suggestions. I am to take up an upgradation project (s7_314 IFM with PC to s7-1500 with TP1900) for our Concrete Block Manufacturing machine. Picture is attached for a transport system, where Wet produced blocks are carried to Curing chambers and after 2 days, removed and transported back to despatch conveyor. There are 21 chambers with 12 rows each (except first 3, which have 9 rows)..
I have s7-314 IFM with one positioning module and several DI,DO modules.
I want to replace Winxp PC with Siemens HMI TP1900. We don't have source file for PC program.
I have tia v15 with wincc advanced with me. I never did any animation project before.
I want to know how shall I proceed for animation programming as currently whole animation programming code is in pc, plc only works as Slave.
What is thr best expert approach for this Hmi animation coding?
Is hmi alone capable of doing so i.e Keeping track which chamber is full and which has empty spaces? Can HMI decide the Filling and Removing Chambers on it's own and direct PLC accordingly?
Guys! Don't hesitate to reply. I just need an Expert approach to accomplish this animation and storage task (without/few changes in PLC program).
Regards,
Mr. G M Ansari