Hi all!!!
For two days I'm trying to solve my problem, but I'm still not able to understand what's wrong.
I have some PLC and one HMI. I would like to visualiazate graphs which are implemented on PLCs. I configure my sequence FBs and messages with "Block Settings" option. In my project I use only Supervisione Error, so I define messages as follows:
PLC1_Suprvision-Error: S@1W%03u@ @1W%t#S7GraphFB11@ @ErrOpAbs1@,@ErrOpSym1@,@ErrOpCom1@
With three last commnds I set that I would like to see absolute address, comment and symbol of conditions which blocks current step. Those settings work only with some sequences, some don't display comment and symbol, besides of the symbol and the comment I have "?", so for example:
PLC1_.....DB110.dbx16.0,?,?
What may be wrong ??
Thank you for any advice
Leszek
For two days I'm trying to solve my problem, but I'm still not able to understand what's wrong.
I have some PLC and one HMI. I would like to visualiazate graphs which are implemented on PLCs. I configure my sequence FBs and messages with "Block Settings" option. In my project I use only Supervisione Error, so I define messages as follows:
PLC1_Suprvision-Error: S@1W%03u@ @1W%t#S7GraphFB11@ @ErrOpAbs1@,@ErrOpSym1@,@ErrOpCom1@
With three last commnds I set that I would like to see absolute address, comment and symbol of conditions which blocks current step. Those settings work only with some sequences, some don't display comment and symbol, besides of the symbol and the comment I have "?", so for example:
PLC1_.....DB110.dbx16.0,?,?
What may be wrong ??
Thank you for any advice
Leszek