I have an existing program running that i would like to add a small change to and don't want to make a mistake.Right now an input I005 is pushed (start button) M000 is set which starts the machine. I would like to add a timer and horn (output).When start is pushed horn will sound for 3 seconds then the machine will start.Does this need a reset for the timer.Machine stops and starts often. Thanks for your help
Winldr help
- Thread starter BWW
- Start date
Similar Topics
Hello everyone I am a beginner and am taking on a project utilizing a PlC. I want to turn a light on throughout the year at different times each...
On a job and using the IDEC Micro FC6A hardware with WinLDR software for the first time and I have a quick ladder logic question.
What's the...
Hi,
I have a very old machine I am trying to fix. The PLC is an FA-2 Junior and I am able to connect to it and monitor the code using WinLDR...
Hello everyone. Could someone please assist me?
I am using Citect version 7.2 service pack 5 and Windows 7.
I have created a project...
Hello, I'm not sure if anyone can help me. I made a big mistake by pulling out the battery to swap it with the machine turned off, and as a...