wireless level sensor

Sparky

Member
Sparky
Join Date
Jan 2003
Location
Twin Falls, ID
Posts
64
Hey guys any one have any eperience with a level sensor that can convert it's signal to RF and broadcast to a reciever on a modem for longdistance remote monitoring??? Any ideas are greatly needed. I need to refine my search to a couple of products or companies. If any one knows anything please let me know.
 

Similar Topics

K
Wireless Access Recomendations
Hello ! I used to have a wireless access point that I could plug into a PLC network and set it with an IP address that fit onto my networks...
Replies
4
Views
107
dwoodlock
dwoodlock
C
Wireless Ethernet
Hello Y'all, I was wondering if there is any standalone solution to replace the ethernet cable to connect to a PLC? like perhaps a "Dongle"...
2
Replies
26
Views
2,395
JeremyM
JeremyM
T
IT question regarding wireless access to PLC device using a typical wireless router..
I know this can be done, but I can't get the router config right. My goal is to physically connect(using an ethernet cable) a device(PLC, RTU...
Replies
9
Views
1,063
I_Automation
I_Automation
C
Wireless IO Link
Hi All, I am working with an outside vendor on a project, and they have asked if they can use Wireless IO link for one of their remote IO blocks...
Replies
2
Views
1,143
tlf30
tlf30
C
Medium Range Wireless Comms with an AP
Hello everyone, I have read a few threads regarding setting up an AP to wirelessly communicate with PLC networks, but I have a unique question on...
Replies
1
Views
599
mk42
M
Back
Top Bottom