AD Analog F4-04AD

[kw2872]

Is anyone familiar with taking a 4-20ma signal direct to an analog input on a F4-04AD Analog Module. I've measured my ma reading on my two wires and I'm getting the analog signal. I'm having trouble with getting it into the Module. The four available terminals per channel are: V, C, I, and 0V. Any ideas?

 

[geniusintraining]

Do you have the jumpers set correct? see page 4

http://web5.automationdirect.com/static/manuals/d4anlg/ch3.pdf

 

[kw2872]

AD Analog Module

Thanks for response, yes the jumpers are set to read all four input channels and for 4-20ma.

 

[Clay B.]

Page 11 of the manual Genius posted has your wiring diagram.

 

[kw2872]

I got it straightened out. Thanks for the responses.

 

[geniusintraining]

I got it straightened out. Thanks for the responses.

So what was the issue??

 

[kw2872]

So what was the issue??

I had the jumpers wrong and wired wrong. I guess it had a reason not to work. Thanks again.