mainstreetmark
Member
A previous programmer has departed our company and stuck me with a perhaps unfinished job, involving a Modbus network and a Prosoft MCM + ControlLogix 5000.
While the logic works, it does not seem to follow the Prosoft manual much at all. He's defined a 'MCM' of type 'MCMModuleDef', and all the UDTs and logic are imported.
However, the manuals for the MCM talk about having MCM.CONFIG, which this does not. This MCM tag has only:
.InStat,
.ReadData,
.WriteData,
.BP,
.P2Slaves
.P3Slaves
...whereas, the manual(s) has ...
.CONFIG
.DATA
.STATUS
.CONTROL
._UTIL
I can find no documentation on that MCM data type.
Any suggestions?
While the logic works, it does not seem to follow the Prosoft manual much at all. He's defined a 'MCM' of type 'MCMModuleDef', and all the UDTs and logic are imported.
However, the manuals for the MCM talk about having MCM.CONFIG, which this does not. This MCM tag has only:
.InStat,
.ReadData,
.WriteData,
.BP,
.P2Slaves
.P3Slaves
...whereas, the manual(s) has ...
.CONFIG
.DATA
.STATUS
.CONTROL
._UTIL
I can find no documentation on that MCM data type.
Any suggestions?