gbradley
Lifetime Supporting Member
I have a Panel view 600 2711-K6C5 Ser B
I went to the Rockwell site to see if I can download older version of Firmware,
http://www.rockwellautomation.com/support/firmware.html
I can't find any downloads for standard Panelviews.
Is there another area to download the Firmware for Panelview 600?
The Fault indicator on the display is lit up solid red with Flash. The Comm on the display is lit up solid green.
The Comm LED in the back and the Fault Red LED are alternately flashing.
Before I send it in for repair I was wondering if it is a Firmware issue.
I downloaded Firmware version FRN: V04.20.
Can the problem be that the Firmware is too new?
I wanted to see if I can download an older version of Firmware.
I don't think that it will help, but I want to try an older version of Firmware.
I went to the Rockwell site to see if I can download older version of Firmware,
http://www.rockwellautomation.com/support/firmware.html
I can't find any downloads for standard Panelviews.
Is there another area to download the Firmware for Panelview 600?
The Fault indicator on the display is lit up solid red with Flash. The Comm on the display is lit up solid green.
The Comm LED in the back and the Fault Red LED are alternately flashing.
Before I send it in for repair I was wondering if it is a Firmware issue.
I downloaded Firmware version FRN: V04.20.
Can the problem be that the Firmware is too new?
I wanted to see if I can download an older version of Firmware.
I don't think that it will help, but I want to try an older version of Firmware.