Thank you, Kalle. I just want to assign 0 to three integer variables. I used Step 7 to convert the LAD, but it seems a mess. I am hoping someone can teach me how to program stl.
O #A1
ON #A2
JC SET
BEU
SET: L 0
T #Time1
T #Time2
T #Time3
I should add that the BEU is just an example, I don't know if you would want to continue in the block or not, the common way would be to have the condition NOT to load the zero and just jump over the transfer section if that NOT condition is true.
O #A1
ON #A2
JC SET
BEU
SET: L 0
T #Time1
T #Time2
T #Time3
I should add that the BEU is just an example, I don't know if you would want to continue in the block or not, the common way would be to have the condition NOT to load the zero and just jump over the transfer section if that NOT condition is true.
I have another question which is in a new post, please tell me if it is possible.
Best regards.
Siemens Basic Question? on WinCC Flexible SCL
Hi all, I was told that I can not program winCC Flexible 2008 in SCL, but today I just saw a Function Block which is created in SCL but unfortunately it is locked so I cannot open the source. If anyone knows how to program in SCL please help.