Module NT-1776-HSD-R for PLC-5 Allen-Bradley

NatMax

Member
Join Date
Apr 2015
Location
Sao Paulo
Posts
2
Hello,

I have two modules NT-1776-HSD-R from New Technology Inc for the Rcokwell Allen-Bradley PLC-5 and I need to run some tests in it.

However I did not find any relevant information about this module, all I can find are stores that sell repair or used equipaments.

I already talked with the Rockwell support, but they do not have nothing in their database.

I looked for this New Technology Inc, but I had no success well, I just found another one with the same name, but they were not the developers of this module.

I would like to know if someone here has more information about this equipment, some documentation, manual, guides...

Any help will be much appreciated.
 
Have you tried calling those stores that repair or sell them to see if they have the manuals or any documentation?
 

Similar Topics

Hello everyone, I've had this issue for the last 2 days where I try to assign the profisafe address to an IO block (6ES7 146-6FF00-0AB0) but when...
Replies
5
Views
139
Hey guys, I just wanted to see if any of the bright minds on here had any opinions on these relay interface modules. Particularly, I would love to...
Replies
1
Views
58
Hi Everyone, i was hoping for a little help with this module. i have data that needs to be read from a different plc through the Modbus plus...
Replies
11
Views
270
Good afternoon, I am currently working with an HMI/PLC LP-a070 and I require at least one analog output, but the PLC does not have one. I was...
Replies
5
Views
129
Why does the controllogix redundancy modules use a single mode fiber vs multimode fiber?
Replies
1
Views
103
Back
Top Bottom