Riaan_bloem
Member
Hi all you clever people.
I have a program line that does not make sense
%MW401 < %MW402------> (%M2) - [%M2 = ON] Which does not make sense
(20 / 10)
Which will mean if 401 is smaller than 402, %m2 must switch on.
as per example above it should be off. yet it stays on.
I have a line at the end of the program that works 100%
%MW401 < %MW402 -----> (%M245) - [%M245 = OFF] Which is correct
(20 / 10)
I have searched the program and there is not a duplicate %m2.
any ideas?
tx
I have a program line that does not make sense
%MW401 < %MW402------> (%M2) - [%M2 = ON] Which does not make sense
(20 / 10)
Which will mean if 401 is smaller than 402, %m2 must switch on.
as per example above it should be off. yet it stays on.
I have a line at the end of the program that works 100%
%MW401 < %MW402 -----> (%M245) - [%M245 = OFF] Which is correct
(20 / 10)
I have searched the program and there is not a duplicate %m2.
any ideas?
tx