Dear Friend,
I know that, can be found in manual book.
1 - Transmit
3 - Receive
2 & 6 - Ground
I don't want to add other modules.
The other pins of onboard RJ45 port should be used to connect with ACS-CP-A/ACS-CP-D/ACS-CP-C.
There are 6 pins using to connect with control panel via panel connector.(1,2,3,6,7&8)
May I know Which PINs were used to give power supply to control panel and what is the supply voltage?(ACS-CP-A/ACS-CP-D/ACS-CP-C).
If you have ACS355,easy to check. Power up and check all pins output.
I didn't bring ACS355 VFD with me, that's why I'm asking for help.
Thanks
[
QUOTE=RussB;706080]The ONLY on board RJ-45 port on an ACS355 is RS-232 and the connections to it are in the first post of this thread.
For anything else you need to add an option module and each has a document detailing its wiring. What is the part number of your option module?
Or do you need assistance with deduction?
1 - Transmit
3 - Receive
2 & 6 - Ground
The others are not used.[/QUOTE]