Scaling PT100 with schnider m211

Similar Topics

I
PT100 Scaling in RSlogix 5000
Hi Group, I used the scaling block in RSlogix5K to display PT100 on HMI but the problem is, every time when I measure the resistance across the...
Replies
6
Views
10,439
InstrumentationUK
I
U
4-20mA scaling (PT100 measuring) in Step7
I have a scaling problem. I have a 2-wire analog 4-20mA input. There is a PT100 connected to it with a range from -30 tot +60 degrees. What I...
2 3
Replies
41
Views
40,087
Dennis de Jong
D
T
Dynamix 1444 to OSI scaling
I have everything set up for vibration monitoring with the code in Controllogix 5000. The thing is that I am not able to read values SCADA in mm/s...
Replies
0
Views
28
TM44
T
R
1746-NI8 scaling problems
Hi, having some issues with scalings (SCP commands) with some Vegapuls 65 guided wave radar level transmitters. I've set the min/max in the...
Replies
5
Views
195
Robb B
R
C
Tank water level scaling in PLC
I want to measure the tank level and get the sensor output to the PLC. Below are the details : Tank Height =0 - 3m, the sensor is stalled 0,2m...
2
Replies
15
Views
657
colesha
C
Back
Top Bottom