MorphuisOGrady
Member
OP
Hi all,
Thank you so much for the input on this. Lots of great stuff here.
I'm sorry I didn't provide enough information.
I am controlling air flow.
I have no position feedback.
The valve is motor driven.
The pressures we are dealing with are about 7 Bar.
@Mispeld. Would you mind sharing the math to perform this linearization?
Is temperature a large factor? Didn't consider it to be honest. I can install a temperature transmitter if required.
Thank you so much for the input on this. Lots of great stuff here.
I'm sorry I didn't provide enough information.
I am controlling air flow.
I have no position feedback.
The valve is motor driven.
The pressures we are dealing with are about 7 Bar.
@Mispeld. Would you mind sharing the math to perform this linearization?
Is temperature a large factor? Didn't consider it to be honest. I can install a temperature transmitter if required.