Fyfey96
Member
Hi All,
I'm based in the UK and usually when I set up a Powerflex Drive I enter the Motor Nameplate Details from the motor that match our supply here on site. However, we have a pump we require a little more flow from so it has been suggested to run the pump at 60Hz. I have the pump running at 60Hz but should I be updating the motor nameplate details to match a 60Hz supply as the motor has voltages etc for a 60Hz supply and 50Hz supply.
Thanks!
Ally
I'm based in the UK and usually when I set up a Powerflex Drive I enter the Motor Nameplate Details from the motor that match our supply here on site. However, we have a pump we require a little more flow from so it has been suggested to run the pump at 60Hz. I have the pump running at 60Hz but should I be updating the motor nameplate details to match a 60Hz supply as the motor has voltages etc for a 60Hz supply and 50Hz supply.
Thanks!
Ally