Wonderware Intouch 10.0

I intend to replace my panel pc 577B that controls production process with a desktop, in order to be able to maintain the panel pc. i have installed the wonderware intouch 10.0, SIDIrect DAserver on that desktop. I also took the backup of the panel for project, hardware, and license. I pasted the backups at their place in order to work however, I can't find the hardware configuration I have on the panel pc. does any one knows how to import that it to my windowmaker??

thanks.

A little confused about what you mean by hardware configuration in windowmaker. DAserver has a hardware configuration that you can archive & then restore to your new desktop. In system management console, right click on the configuration and select archive configuration. Where this configuration gets saved varies with the version of windows you are running. Easiest way to find it is to search your hard drive for *.aacfg then copy it to your new machine. in SMC, right click again and select use another configuration. If you've copied the file to the correct place, it will show up as an option...

I have put the .aacfg file in the right directory, my concern is that the hardware configuration (tanks, pumps, blowers,......etc) should be appear in the windowmaker but, it doesn't. what shall I do to make this configuration appears??

You need to open Intouch and then import the project before opening WindowMaker.