How to Disable Factorytalk View SE Wireframing

Hi all,

I'm working on a project in FactoryTalk View Studion 8.1. One of my tags comes from a source that occasionally spits out bad data, which causes my indicators to wireframe.

In the case of these particular indicators, It would be ideal if my indicators were totally invisible when the data is bad. Is that possible?

Thanks in advance!

How about using this function with visibility animation:

COMM_ERR(tag)
1 (True) if a read or write operation for the specified tag produced a communication failure. You cannot examine the status of more than one tag with this function.

That seems to have worked. Thanks!