hegde10122
Member
- Join Date
- Aug 2004
- Posts
- 5
I am supposed to program for the following data:
There are 4 motorised valves and the resistance mounted on motor shaft is used as percentage opening data to plc. The PLC module is Micrologix 1200 AB plc and 1762-IR4 RTD module. The value of the resistance lies between 0 to 600 ohms.
There are 4 motorised valves and the resistance mounted on motor shaft is used as percentage opening data to plc. The PLC module is Micrologix 1200 AB plc and 1762-IR4 RTD module. The value of the resistance lies between 0 to 600 ohms.