SINAMIC G120 & s7-1200 Profinet

arkngl2102

Member
A
Join Date
Jul 2015
Location
Mexico_City
Posts
36
hi all thanks in advance for read this:

i have a SINAMIC G120, cu230P-2-DP conected with s7-1200.. all conection ok.. i can RUN/STOP through STW1.

my question is how can monitoring Current ampers..

i recieve from Telegram_352, Actual_speed, on db configured with "G_Telegramm_352".. but 0 on "Actual_current" and "Actual_torque"

someone can help me.. i need monitoring r27 -> Aef
 
already did that :(

2m4uib9.png


whats missing :S
 
Show me a screenshot of drive parameters 2050 and 2051
Index 0-5 of each. I don't have in front of me. I believe those are send and receive from drive
 
Last edited:

Similar Topics

M
Sinamic V20 Actual Current Output
Hello all! I have a problem. We are using SINAMICS V20 (6SL3210-5BB17-5UV1) to move a car tire with a motor up and down. The main principle is...
Replies
1
Views
1,097
drbitboy
drbitboy
Alamgir Hossain
Need some help about sinamic manager s7-program
Hello All I would like to know the programming code name & the offline simulation process.I tried but it appeared a error led sign. Here I...
2
Replies
24
Views
3,750
L D[AR2P#0.0]
L
J
sinamic faults
Hi, I need help. there are two identical new machines which use sinamic s120 cu320 + SML+ MM controlled by 315F-2dp PLC in my company. one works...
Replies
1
Views
2,248
L D[AR2P#0.0]
L
A
interpretation of incoming data from G120
Hi as a beginner am learning about the G120 (CU240e-2pn) controlled by 1200plc 1-how can i interpret the hex values coming from the vfd...
Replies
1
Views
132
L D[AR2P#0.0]
L
H
Siemens Drive G120 IO address
Hi All CPU 1517F-3, Drives G120C Working on a project that is under development, so more IO will be added as we go along, to keep my drives out...
Replies
12
Views
679
Holmux
H
Back
Top Bottom