Weintek PLC

manin

Member
M
Join Date
Jan 2015
Location
Athens
Posts
37
Hello, I am studying how I can use macros in HMI.
At this time I work with Weintek..
I am searching how function key works when it is set in ASCII mode...
I want If Function key is pressed to save the ASCII to a word with macro...
How can I do that?
Thanks
 

Similar Topics

S
FX2N PLC Integration with 2 Weintek HMI.
Hello everyone, I am currently facing a challenge while trying to connect two Weintek HMI units with a Mitsubishi FX2N PLC. When connecting a...
Replies
5
Views
581
Steve Bailey
Steve Bailey
S
Weintek 8102ip with s7-300 PLC
HI, I want to know does MT8102ip Weintek HMI work with S7-300 CPU 315 2dp via MPI? I saw manual of MT8102ie showing that it supports 187.5kMPI...
Replies
5
Views
1,918
L D[AR2P#0.0]
L
TimWilborne
Weintek to Micrologix PLC
I'm doing my first Weintek project using a Micrologix 1400 PLC and need some help with my communications configuration. I am using the "Rockwell...
Replies
6
Views
2,851
TimWilborne
TimWilborne
K
Serial Communication between Weintek HMI and Fatek PLC
I am working to control some objects using Weintek HMI through Fatek PLC. I wrote a simple program to control an output Y_0 using input X_0. I...
Replies
3
Views
3,843
yasir_66
Y
G
Weintek no PLC response
Having problems with The Weintek MT6070iH 5WV not connecting to the PLC. Like If I copy the program from one HMI and put in another the same model...
4 5 6
Replies
78
Views
24,621
qrtvs
Q
Back
Top Bottom