hi all PLC experts,
im now doing a project where i have limited input terminals. so
i tried to reduced the usage of input terminals in operation
box selector switches.
my drawing will show you how the wiring is designed. so X2406 -
X2415 are my original plc inputs terminals. Y2803-Y2805 are my
outputs.
The numbers in my bracket is my operation box selector switches.
those will be my simulated inputs and worked like normal plc input
terminals.
so i tried to use 'bit transfer' function XFRB (62) in omron to make these inputs work. since i dont have a simulator, im not sure if i got this function correctly written.
i'll upload my mneaumonic code here(too big for ladder),please give me some comments.
thank you.
im now doing a project where i have limited input terminals. so
i tried to reduced the usage of input terminals in operation
box selector switches.
my drawing will show you how the wiring is designed. so X2406 -
X2415 are my original plc inputs terminals. Y2803-Y2805 are my
outputs.
The numbers in my bracket is my operation box selector switches.
those will be my simulated inputs and worked like normal plc input
terminals.
so i tried to use 'bit transfer' function XFRB (62) in omron to make these inputs work. since i dont have a simulator, im not sure if i got this function correctly written.
i'll upload my mneaumonic code here(too big for ladder),please give me some comments.
thank you.