BachPhi
Member
I have a PLC2 system with 1771-KA2 DataHighWay Comm. Adapter.
On the PC side running XP SP3 FAT32 partition, with Icom AI2 6.25.
1) Using a smart serial cable, plug it into the 'Program Interface' connector of KA2 card. I am able to go online with it. AB web site said to use F2 'ICOM Serial Cable' option, but for me it's worked with 'ICOM No Power RS232' option.
2) I have a 1784-PCMK/B card with 1784-PCM2 cable.
PCMK card is recognized by the system after installing RSLINX2.57.
In RSLINX, I setup a driver using PCMK option.
I plugged it into the 'Program Interface' connector of KA2 card. In ICOM , I change the settings to use 'RSLINX Driver under NT'.... BUT It is not working for me.
Any help would be appreciated.
On the PC side running XP SP3 FAT32 partition, with Icom AI2 6.25.
1) Using a smart serial cable, plug it into the 'Program Interface' connector of KA2 card. I am able to go online with it. AB web site said to use F2 'ICOM Serial Cable' option, but for me it's worked with 'ICOM No Power RS232' option.
2) I have a 1784-PCMK/B card with 1784-PCM2 cable.
PCMK card is recognized by the system after installing RSLINX2.57.
In RSLINX, I setup a driver using PCMK option.
I plugged it into the 'Program Interface' connector of KA2 card. In ICOM , I change the settings to use 'RSLINX Driver under NT'.... BUT It is not working for me.
Any help would be appreciated.