Jason Ozolins
Member
Has anybody set up a Horner HE-XC1E0 or similar model HMI to a MicroLogix? All the help and tutorials I have found only include Compact/Controllogix controllers via adding a generic ETH/IP card in RS5000 and importing back into cScape with the L5K file.
If anybody has dealt with these HMI's to RS500 controllers, I'd appreciate a nudge in the right direction.
Thanks,
Jason
If anybody has dealt with these HMI's to RS500 controllers, I'd appreciate a nudge in the right direction.
Thanks,
Jason