trentg@felixconstruc
Member
I am having problems connecting my L32E to an ABB ACS550 RETA-01 Ethernet/IP Module. AB tells me the problem is with the RETA and ABB tells me it on my PLC side or a "bad" RETA module... Do an RMA and send it in or try a new module. This would be great if I had the time or an extra module, but this is installed and we are trying to commission.
Is there a Ethernet/IP tool I can download to read/write to registers directly from PC to RETA module? Also, this module has the ability to perform Modbus TCP/IP protocol. If I switch the comms protocol in the module and test via Modbus simulator and can read/write to the designated registers does that indicate that the Ethernet/IP protocol should be functioning as well?
Thanks for the assistance!
T.
Is there a Ethernet/IP tool I can download to read/write to registers directly from PC to RETA module? Also, this module has the ability to perform Modbus TCP/IP protocol. If I switch the comms protocol in the module and test via Modbus simulator and can read/write to the designated registers does that indicate that the Ethernet/IP protocol should be functioning as well?
Thanks for the assistance!
T.