How to connect Delta PLC with indusoft v7.5

The Delta website says that PLC controller's communication ports are:

Built-in RS-232, RS-485 & USB ports, compatible with ASCII/RTU protocol. Can be master or slave.
Click to expand...

The "ASCII/RTU" term suggests very strongly that they support Modbus RTU protocol.

Indusoft's Modbus RTU protocol driver will easily connect to the controller.

You'll have to figure out exactly what elements of the controller data table are exposed to Modbus, and how they are addressed.
 

Similar Topics

G
Connect HMI DELTA with PLC IDEC via RS 232C/485
I'm trying to establish communication between an HMI DELTA (DOP-B07E515) and a PLC IDEC (FC6A-D16R1CEE) via the RS-232C/485 module (FC6A-SIF-52)...
Replies
2
Views
567
gide007
G
H
Can i connect Delta PLC with Seven segment?
Hi, Can i connect Delta PLC with Seven segment? How?
Replies
5
Views
2,966
2rlp
2rlp
H
how to connect VFD with PLC all are delta
Hi guys, I want to connect VFD (vfd110E43a) with PLC (DVP14SS2). 1- How many inputs and outputs needed for the VFD? I want to control it...
Replies
8
Views
3,520
HamzaAhmed
H
H
Can i connect Delta PLC with Siemens PLC with modbus
Hello guys, I have a siemens PLC and i want to add a new preocess without touch the Siemens code, so i am going to add Delta PLC, this PLC will...
Replies
11
Views
5,900
HamzaAhmed
H
Y
Connect GSM Modem to Delta PLC and write AT commands
I recently purchased a GSM modem model number SGM510 from a local dealer in Mumbai, India and I am trying to connect it to a Delta PLC that I have...
Replies
0
Views
1,681
Yash Sanghvi
Y
Back
Top Bottom