Wonderware Intouch & MatrikonOPC Simulation and Testing

Zubairjaved786

Member
Z
Join Date
Jan 2016
Location
Sharjah
Posts
20
Hi all,
I'm new to OPC sort of thing...Please let me know how to Setup communication between Wonderware and MatrikonOPC simulaton...!!! I'm creating tag on Matrikon and want to tag values on wonderware graphics.
When i create ItemId its Quality is Good but Non Specific.I am using Matrikon.OPC.Simulation.1
what i have to write as Access name , Application name & Topic in Wonderware :)
Thanks
 

Similar Topics

P
Wonderware intouch scada
Hi guys, I have experience with PLC to Excel etc...just starting on using intouch scada screens. I have an Excel sheet that uses mainly...
Replies
1
Views
148
NetNathan
N
M
PROBLEMA WONDERWARE INTOUCH V23 Y DASABCIP
Hola chicos. Tengo un problema con el driver de comucicacion dasabcip 5, y un plc controllogix v34, ya realice la comunicacion pero en ciertos...
Replies
2
Views
158
JeffStadnik
J
M
Wonderware Upgrading (from Intouch WindowMaker 9.5 to Intouch WindowMaker 23)
Hi, I am upgrading a Wonderware SCADA form version 9.5 to version 23. I am able to migrate all the graphic, but when to activate the runtime this...
Replies
8
Views
411
MuHaDa15
M
X
Wonderware InTouch v11.1 tag definition OPC UA
Hi all, I am using OI.GATEWAY.2 to communicate to the PLC using an OPC UA. I can see the tags using an OPC explorer connecting to the...
Replies
0
Views
184
xavisole125
X
D
Wonderware InTouch 10.1 Functions ScriptSDK
For a while, I have been working with InTouch 10.1. The problem I am currently facing is the need to implement certain functions that do not...
Replies
0
Views
480
Delorean12DMC
D
Back
Top Bottom