antwan_jacoup
Member
Can used OTB Ethernet as IO distribute for PLC M340
and how i can do it
and how i can do it
Can used OTB Ethernet as IO distribute for PLC M340
- Thread starter antwan_jacoup
- Start date
robertkjonesjr
Member
Likely, use IOScanner from an NOE or NOC.
antwan_jacoup
Member
OP
Do you have any example
robertkjonesjr
Member
The manual contains some instructions:
http://www2.schneider-electric.com/resources/sites/SCHNEIDER_ELECTRIC/content/live/FAQS/142000/FA142326/es_ES/Modicon M340 for Ethernet Communications Modules and Processors.pdf
Another link with some information is here.
antwan_jacoup
Member
OP
how i can read digital input from OTB Ethernet in M340
Similar Topics
Good Afternoon ,
It has been decades since I have done anything with Siemens . What is the Siemens name of their Servo Product Line and what...
hi all i am new here i have a mitsubishi smart touch hmi i.e ms-60t-pe but i cannot find a software to edit and download a program in it any help...
FactoryTalk View ME running on PanelView Plus 7, connected to Compact GuardLogix 5380 PLC
Customer is asking for a physical push button to be...
In a control System, I need to move 3 motors attached to roller in stages with speed of 1 to 2 RPM and the torque of motor should be 8-10 Nm...
Hallo,
Please, I would like to ask that ETAP1F can be used as a media convertor from fiber to copper and copper to Fiber in DLR?
I have attached...