1756-CFM Contact Output Configuration

endangs

Member
E
Join Date
Aug 2016
Location
Jakarta
Posts
19
Anyone has an experienced configuring 1756-CFM module for Contact Output that triggered by overspeed alarm ?
This CFM module was to monitor engine speed rotation with a magnetic pick up as a sensing device.
If so, could you share the detail configuration / RSLogix5000 configuration ? since we have failed to configure it..
 

Similar Topics

plc.doctor
Arrgh! Trying to setup a 1756-CFM
Trying to get a handle on using the 1756-CFM flowmeter module. We have C.Operations[0].kFactStruct.kFactorForChan[0] set to the k-factor of the...
Replies
0
Views
1,669
plc.doctor
plc.doctor
E
1756-CFM Output Configuration
Dear All, I have problem with configuring the 1756-CFM in RSLogix5000 Version 19, this module is used to monitor Engine Speed thru the Magnetic...
Replies
6
Views
4,551
endangs
E
M
E+H 83F Frequency output to a 1756-CFM
Hi guys, Im trying to make this flowmeter work properly, (Endress+Hauser Promass 83F) i did some batch test to weight my liquid and the totalizer...
Replies
10
Views
3,324
Martindag
M
M
1756-CFM with GF Signet 2536
Hello all. I'm having issues programming the 1756-CFM with the GF Signet 2536. Does any one have the tags I should use for to display the...
Replies
0
Views
1,486
mikel73
M
P
Logix 5000 using 1756-CFM with PM_Dose
Has anyone used the 1756-CFM module with the add on instruction PM_Dose? If so do you have any programming examples??
Replies
0
Views
1,471
protrac231
P
Back
Top Bottom