plc.doctor
Lifetime Supporting Member
Trying to get a handle on using the 1756-CFM flowmeter module.
We have C.Operations[0].kFactStruct.kFactorForChan[0] set to the k-factor of the turbine flowmeter. What do we need to set for C.Operations[0].kFactStruct.FreqAtKFactor[0]?
When do we need to use the other setting for channel 0? Are they to compensate for the flow rate changing at greater flow rates?
Is there a "for dummies book" for using this module?
We used plenty of 1771-CFM's without having this much head scratching.
We have C.Operations[0].kFactStruct.kFactorForChan[0] set to the k-factor of the turbine flowmeter. What do we need to set for C.Operations[0].kFactStruct.FreqAtKFactor[0]?
When do we need to use the other setting for channel 0? Are they to compensate for the flow rate changing at greater flow rates?
Is there a "for dummies book" for using this module?
We used plenty of 1771-CFM's without having this much head scratching.