IEC 61850 and distance
- Thread starter Oubax
- Start date
http://www.plctalk.net/qanda/showthread.php?t=4878
The above thread may help you out. You need to know the maximum length on your communication cable, not the protocol that you are going to use.
Hope this helps you out.
Regards,
The above thread may help you out. You need to know the maximum length on your communication cable, not the protocol that you are going to use.
Hope this helps you out.
Regards,
Similar Topics
Hi all,
Is there any IEC 61850 Communication card for Electrical Relay in AB Controllogx system? Thanks a lot!
Hello,
I'm working on a WinCC scada project. The customer wants to have a IEC61850 communication. I don't know if SIEMENS offers an OPC server...
Hi,
We have a project where we have to "talk" to an ABB REF543 relay from a logix platform. We cannot use modbus because we need the...
I am trying to deal with fragmented data, and have been getting stuck. So far I am able to command the Fuchs VE Software version correctly and I...
Hi all,
I am getting back to using IEC for schematics and was wondering about the 81346-2:2019 codes.
What does everyone use for a diffuse...