RVJRII
Member
We have asked Sy/Max and a few other dealers of SquareD on the subject. We orginally had a 700 processor with a 700 Memory Module attached to the system. The 700 Processor went bad along with the memory module. We were forced to go to a 600 processor. Well the 600 processor only has 2 ports. We need ports 2 and 3. Don't ask me why they hooked it up that way? Anyways we also hooked up a SPE4 port expander which is suppose to expand the available ports for the 600. We are in the processor of changing from the JC500 system to the Factory Link system. The Factory link will work on port 1 & port 2 of the 600 processor, and the expansion card (SPE4), the JC500 will not work on either one. We are hooked up through serial. Yes we went through the ladder logic and changed the print link to read port 1 as well as port 2. Only for those who know that the 700 is a dinosaur you have to understand that our company they get there use out of equipment.