panic mode
Member
hello everyone,
trying to find a way to read/write memory of the PLC that is inside Unidrive M700 over Ethernet (modbus TCP)
using device/server "Control Techniques SI-Ethernet Modbus TCP" works but it only allows access to drive through menu parameters.
but since the idea is to use built in PLC to automate some additional things, i need access to the PLC side.
I tried switching to generic ModbusTCP driver like one from Schneider and of course it did not work.
Any ideas?
trying to find a way to read/write memory of the PLC that is inside Unidrive M700 over Ethernet (modbus TCP)
using device/server "Control Techniques SI-Ethernet Modbus TCP" works but it only allows access to drive through menu parameters.
but since the idea is to use built in PLC to automate some additional things, i need access to the PLC side.
I tried switching to generic ModbusTCP driver like one from Schneider and of course it did not work.
Any ideas?
