Help - Comparison of PLC rated SIL2 with a non-rated PLC

felfel

Member
F
Join Date
Mar 2005
Posts
2
Hello,

How could I evaluate my application and see if
I need a PLC rated to SIL2 safety or not?
What I will gain from safety point of view from
a SIL 2 PLC compared to a non-rated PLC.

Thanks for your help.
 

Similar Topics

A
Help PLZ, confused in Data Comparison
Hi, Hello to all guys, I have a problem to ask. Plz help me. I have made a Global DB (named as DB1), in which i have define an ARRAY of 4...
2
Replies
18
Views
3,790
L D[AR2P#0.0]
L
N
Help with Micrologix bit comparison
I'm trying to compare the upper 8 bits of a word with the lower 8 bits of another word. Is there a simple way of doing this? I can think of some...
Replies
1
Views
2,729
TConnolly
TConnolly
D
Please help me make this ladder diagram
please help me . I have to make this ladder diagram and I can’t figure it out :(
Replies
11
Views
156
Jeev
Jeev
D
Help with TCSEGDB23F24FA M340 Modbus Plus Proxy Module
Hi Everyone, i was hoping for a little help with this module. i have data that needs to be read from a different plc through the Modbus plus...
Replies
11
Views
158
davexr
D
B
A little Ladder logic help
Hello, I am trying to replicate a piece of logic on the PLC5 onto an SEL RTAC. I am using ladder on SEL and FBD. I am having issue on the ladder...
Replies
11
Views
157
SCADA_Joe
SCADA_Joe
Back
Top Bottom