carpenterpeter
Guest
C
Does any one have a schematic for the PC to PLC cable for the SIMATIC S7 MPI.
If you mean the PC to PLC convertor, than I have bad news for you. That one is one of the best kept secrets at Siemens. And BTW, it's not simply a cable, but a combination interface/protocol convertor.
Kind regards,
Jean Pierre Vandecandelaere
Kind regards,
Jean Pierre Vandecandelaere
moggie
Lifetime Supporting Member
MPI Cable
Have a look on the following web site for an interface.
http://www.process-informatik.de
This interface will automatically select the correct "protocols for S7-200 and/or S7-300/400 PLC's
Have a look on the following web site for an interface.
http://www.process-informatik.de
This interface will automatically select the correct "protocols for S7-200 and/or S7-300/400 PLC's
Mike Williams
Member
Try this
http://www.runmode.com/
http://www.runmode.com/
Similar Topics
- Poll
I am beginner for PLC programming and I have cable s7 300 USB/MPI cable but unable to find drivers for that cable . Can any one help me to find...
Dear friends .
I have is CP5711 siemens , it is having USB cable from Laptop to CP5711 Port. but does not have a cable from Other side (serial)...
Hi, dear friends .
i have an USB-MPI cable for the programming of s7-300 PLC. i need to install the driver for this. do you know any link to...
Hello Guys,
Can we use USB/MPI adapter cable with S7-200 cpu226 PLC?.. Waiting for kind advice..
I'd like to use usb MPI cabe to connect Siemens PLC to KepwareServerEx, but i do not know which driver i should choose and how to assign parameter...