C-H PID Control Help Needed

Charles1

Member
C
Join Date
May 2005
Posts
30
Does anyone know how to determine the parameters to set up a PID controller with a Cutler-Hammer PLC ie. ELC-PA10NNDR, etc.? And/or maybe the theory behind the parameters? Thank you to anyone who can help.

C.
 

Similar Topics

4
Help on PID control
Hello all, I have an issue with a PID block in RsLogix 5000. The parameters are P: 3.25 I: 0.11 D: 0.01 The Set Point is 71 psi This loop...
3 4 5
Replies
63
Views
14,974
Peter Nachtwey
Peter Nachtwey
sparkytex
please help! damn PID control
So were commissioning all the PID loops I had programmed to work with the new wonderware HMI system that was installed. Got all but 1 tuned pretty...
Replies
3
Views
2,363
Peter Nachtwey
Peter Nachtwey
B
Chemical Injection PID Control Help
Allen Bradley PLC 5 What operations wants to do is as the Oil Flow rate (0-3000 m3/d) increases more chemical is injected into the flow line...
Replies
8
Views
2,511
kamenges
K
O
PID Pump control Help
Hi All, I have been asked to modify our contact tank pumping station controls. Currently pump speeds are manually entered (as %) by operators...
Replies
2
Views
2,248
errante44
E
Joel201
Help In PID Control
Good Day, I have been programming for a while and a complete newbie in using a PID Control block. Now i am studying 📚 it using PC...
Replies
12
Views
4,602
Joel201
Joel201
Back
Top Bottom