Cincinnai/DynaComp HMI

degreg

Member
D
Join Date
Jun 2005
Posts
1
Hi, I looking for development software to make some changes to a Cincinnati/DynaComp Inc. TouchView HMI. I believe Cincinnati/DynaComp was bought by Total Control, and Total Control has since been acquired by GE. The label on the back of the panel has the following information... Total Control, Model# 7100ST.
I need to add alarms and would like to use the Touchview.
Thanks,
Degreg
 

Similar Topics

S
How to Open Third Party APK(Like chrome or Any other software)From Factory Talk view HMI
I am using Factory Talk view Machine Edition Runtime HMI. I want to configure on button in such way that when i press this button I want to...
Replies
3
Views
105
hardaysknight
H
T
PLC Delta DVP 12SE and HMI Kinco GL043E not propperly connecting
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Replies
0
Views
38
Tecnolaundry
T
B
HMI GRAPHICS MISSING_WINCC UNIFIED V18.UPD3
Does anyone happen to know how to install the graphic picture in HMI when I go into blower selection there are no graphics shown not only blower...
Replies
1
Views
65
Jkoso
J
B
HMI GRAPHICS MISSING
Does anyone happen to know how to install the graphic picture in HMI when I go into blower selection there are no graphics show not only blower...
Replies
1
Views
99
Mark-
M
C
Air Conditioning for HMI
Hello All, I've been tasked with automating a flatbed press that runs with some pretty extreme temperatures. I've been told it can run close to...
Replies
4
Views
167
cm-nonwov
C
Back
Top Bottom