GeryUm
Guest
G
Hi..
I used Panelview Plus 1500 communicate with PLC-5/25 via DH+. I have setup alarm banner and only display if we reset Panelview or boot to Panelview. In normal operation, if alarm triggered, alarm page is still empty.
I use bit triggered type for 64 alarms (starting from bit b3:0 to b3:3).
How to solve this problem?
Thank you for help.
Gery
I used Panelview Plus 1500 communicate with PLC-5/25 via DH+. I have setup alarm banner and only display if we reset Panelview or boot to Panelview. In normal operation, if alarm triggered, alarm page is still empty.
I use bit triggered type for 64 alarms (starting from bit b3:0 to b3:3).
How to solve this problem?
Thank you for help.
Gery